In some states, such as Florida, it’s legal to ride a motorcycle without a helmet. I ride on these and I can’t imagine not having a helmet on my head at all times. For some bizarre reason, there are those individuals who feel it’s necessary to ride without one, but I want to point out why you should wear one. It’s not because I do, but it’s because of the sheer fact of safety. Riding should be fun, not life threatening.
Helmets are made of quite a few different components. If you have a full face helmet, which is probably one of the best motorcycle helmets for the money, they have plenty of padding and a protective shell. The shell disperses energy and the liner absorbs the impact of the fall. You also have the face shield that protects your eyes and face from debris and gives you good vision while out on the road.
Half shell helmets protect the head, but they aren’t as protective as the full face ones. They are simply a half helmet that sits on the top of your head and are secured by a chin strap. Unfortunately, these don’t protect your face as a full face helmet would. They’re pretty much the bare minimum that you could possibly have.
Open face helmets, or ¾ helmets, are just like full faced except they don’t have a face shield. They do offer more comfort and support than a half shell would, but still no face visor. They’re also very affordable and have a ton of options. These will protect the side and top of your head from impact.
In 2013, an alarming 4,668 riders were killed in in traffic incidents. This went down from the previous year, but that’s still a lot of people who lost their lives doing something that they enjoy. It’s estimated by NHTSA that helmets saved the lives of 1,630 riders in this same year. If all of the riders were wearing helmets, an additional 715 lives may have been saved. It was shown that 59% of these individuals were in states without universal helmet laws as opposed to 8% who were in states with universal helmet laws.
Helmets may not seem like such a big deal to individuals, but they really are an essential life saving piece of equipment that you should be wearing at all times, whether or not they are mandatory. It may take a little while to choose which one you want, but it will all be worth it when you’re protected that one and only time you may ever drop your bike, not to say it will ever happen, but just in case.
Not everybody is going to have the same outlook on motorcycle helmets as I do, but I will always wear one and I think that it’s important that one is always worn. They come in all different colors, sizes, shapes, designs, and you can even have them custom made for you. Don’t let an accident completely ruin your life because you chose not to protect your head. Do the right thing and invest in a great helmet.
Anyone who appreciates the feeling of the wind in their hair on the open road likely has an overall appreciation for the great outdoors. Here, you can put your cares to the side and truly enjoy nature. Best of all, there are so many things you can do to occupy your time such as:
Whatever your outdoor hobby of choice may be, you likely have special equipment, and these items can often be pricey. In order to ensure yours is protected, there are a few helpful tips you should consider employing.
Your motorcycle has a crucial job to perform. Without it, your risk of becoming a fatal statistic is increased by about 37 percent. Therefore, it’s important that you always have it available, even if you’re just riding a couple of blocks away.
It can be all too easy to simply put your helmet on the shelf after a ride and forget about it until you ride again. However, consider the fact that the inside of your helmet absorbs lots of sweat and body oils while the outside is constantly being blasted with bugs and other road debris. That’s why it’s important that you take the time to clean your helmet regularly relative to the frequency you use it. Just a few cleaning tips to employ include:
If you’re like the approximately three million Canadians who purchased a hunting license last year, then you know just what a thrill it is to get out and track your prey. As human beings, we have a need to eat. Before supermarkets and restaurants were just a quick trip away, we had to get out and hunt our food, and the desire to do so is still within many of us. Today, however, we have guns and other tools to make it easier than ever to succeed on the hunt.
The investment in guns, however, can be significant, and you wouldn’t want yours to become damaged. Furthermore, guns do pose certain risks, especially if you have young children in the home. A great investment that can offer your firearms and your family the protection necessary for responsible gun ownership is a gun safe. Liberty is a good brand, and you can read all about what real customers have to say to ensure you find just the product to meet your specific needs.
Drones have taken the world by storm, and they serve a number of valuable purposes. From military use to agriculture, security and more, they truly allow us to work smarter instead of harder.
A growing number is purchasing drones for their own personal use and enjoyment, and you can take advantage of a number of unique abilities with a drone of your own including help in hunting or just to get aerial footage of your property. In order to ensure you keep your drone in working order, make sure to:
Most of the equipment designed for outdoor hobby use is manufactured to be durable and withstand a lot. After all, it can get rough in the outdoors. However, unexpected circumstances can inevitably cause unforeseen damage, and this leaves you with the choice of setting your hobby aside or making a significant investment in repairs or replacements. It’s ideal that you never fall victim in the first place, and you have the power in your hands to prevent this from happening.
Your leisure time is precious to you, and you should be able to do what you love. Don’t let unexpected damage to your favorite outdoor toys get in the way from enjoying the quality of life you deserve. By employing these tips, you can keep yours better protected from harm’s way.
If you are in the market for a new helmet you might have heard about modular helmets. This article will shed some light on these products and how they compare to their full faced brethren.
Modular helmets have the ability to raise the chinbar and face shield to expose the rider’s face. This is accomplished by a hinge mechanism around the rider’s temple which is activated by a latch usually located on the chin bar. This feature is meant purely for convenience and the helmet is not to be worn this way when riding the motorcycle. With the faceshield and chinbar lowered, the rider’s face is completely enclosed, much like a full face helmet.
These type of helmets have become more and more popular in recent years, especially with touring riders or city commuters. They allow the rider to pop the helmet open during red lights to grab some fresh air. When the light turns green, it only takes a split second to drop the chin bar and be on your way. You can raise the shield on a full face helmet to get some air but the fact that the chin bar is out of the way exposes much more of your face to quickly vent hot air trapped inside the helmet.
Have you ever heard someone trying to talk while wearing a full face helmet? They almost have to yell for someone to hear what they are trying to say. If the person they are trying to talk to is also wearing a similar helmet, a regular conversation sounds like a yelling match. Again, raising the face shield on a full face can let more of your voice get through but that chin bar in front of your mouth still muffles the sound.
If you are a rider that needs prescription glasses to operate safely on the road, then you might want to try a modular helmet. When the chin bar and face shield are up, you won’t need to remove your glasses to get in and out of your helmet. You can also do the same thing if you’re wearing regular sunglasses.
Another convenient thing about flip up helmets becomes apparent if you’ve ever been asked to present your driver’s license or some form of ID while stopped on your motorcycle. You can keep your helmet on your head while the other person makes sure that the picture on the card matches the person underneath the helmet.
As you can see, there are a lot of benefits to wearing a modular helmet. But you should also know that in order to allow the flip up features, there are obviously going to be some engineering differences in the helmet. To make room for the hinges and latch mechanisms, the internal padding has to be thinner, which might make it more uncomfortable for some. Since the front part of the helmet has to move freely, this also creates an area that allows for more wind and road noise to get through.
The chin bar on a modular helmet also has a hinge that makes it susceptible to impact damage in the event of a crash. Modular helmets are also significantly heavier because of the added components. Keep in mind that modular helmets are DOT approved and that brands with the European ECE certification are tested to some very high industry specifications. ECE certified helmets are the standard in MotoGP racing.
Because of their one piece structure, full face helmets don’t suffer from any weak points like hinge attachments. They are generally considered the best piece of head gear a safety conscious rider can use. Comfort is a subjective thing but the internal padding of a full face is more generous than a modular because there are no additional pieces to fit inside.
Full face helmets are also manufactured in larger quantities than modular helmets. What this means for the rider is that there are a lot more options if they go with this route. It is easier to find replacement shields, interior padding, and customized components like communicators or internal speakers. For riders who have a hard time finding a helmet that fits correctly, they are more likely to find a fully enclosed helmet that will work for them.
Hopefully this article has given you an idea as to the type of helmet you’d like to get. Before making that purchase, make sure that you try the helmet on and check to make sure it fits properly and comfortably. Don’t be afraid to wander around the store with that helmet. It’s the only way to make sure that you won’t run into any fit problems after some time. There’s a huge difference between putting the helmet on for a few seconds in a store and wearing it for an hour long (or more) ride.
Safety and responsibility are one of the crucial factors motorcycle riders should consider. According to the National Highway Traffic Safety Administration, motorcycle riders are 27 times more likely to have fatal accidents than car drivers. To continue enjoying the amazing experience on the road, you must invest in a safe riding gear, especially the helmet. A helmet protects your head from injuries during a crash. With a helmet on, you will feel safe and confident on the road. Here are a few tips on how to choose the right helmet.
A helmet should have at least two components of safety. The outer shell should be adjusted well to allow the reinforced fiber composites to contract during impact. The composites contract and reduce the intensity of the force significantly before it reaches the head. Another important component of a helmet is the impact-absorbing liner. The liner consists of a Styrofoam material. The material absorbs shock and deflects the impact of the hit away from the head.
Make sure you look at the DOT sticker on the helmet to determine whether it meets the safety standards. The sticker, which comes from the Department of Transportation, is the only way to know whether the helmet will perform. According to the DOT standards, a helmet should be able to absorb a given amount of shock, prevent significant penetration and have a good fitting system. Manufacturing companies must do standard tests under the DOT guidelines before they put the sticker on their helmets. The companies usually send the products to laboratories run by independent institutions for tests. The department then posts the results on its website for those who want to make inquiries.
Retention is an important safety factor that people need to consider if they want to stay safe. A good helmet should stay on your head during a crash. To test whether the helmet you want to buy will stay on your head, adjust the strap. While you adjust the strap, you should feel some pressure on the chin. Also, take the helmet and roll it over your head or lift it up. The helmet should not go off. If the helmet goes off or rolls over quickly, consider other options.
The helmet should be comfortable enough to enable you to enjoy the ride without any problem. Most people believe that there is no such thing as a comfortable helmet. However, the truth is that everybody can find comfort in a new helmet if he or she is willing to take some time and do an extra homework. You need to try more than four helmets to accurately determine the desirable level of comfort in a helmet. Most motorcyclists confirm that the full-face helmet models are the best options. Some full-face models come with interchangeable pads to accommodate different shapes of cheeks. Other standard features that make a helmet comfortable include paddling, presence of the seal around the ear and a roll on the neck.
The size of the helmet will determine the rider’s level of safety and comfort. A helmet with a perfect size should fit you well. It should come into contact with most parts of the head and the sides of the cheek. However, it should not exert a lot of pressure on the parts. The helmet must adjust with the shape of our head, but it should not feel loose. The neck roll should not push the head to the back of the helmet. To get a helmet with a size that matches the shape of your head, take a measuring tape and determine the dimension of the largest circumference of the head. Translate the measurement to the helmet. Try this several times with different helmets until you get the right one. If there is a sizing chart, use it for matching.
Consider the shell coverage of the helmet before you buy it. A full open-face helmet is more efficient that a full-face helmet when it comes to coverage. A helmet with an additional coverage that protects the face and the head from the EPS liner is a plus.
You need to determine how convenient the helmet is when riding your motorcycle. A helmet with an extra shield and an adjustable face-shield system is better. Others have features that allow riders to fasten the straps to prevent them from flapping. A breadth guard may also make the helmet more convenient.
The cost of a helmet should be the last thing to consider. Helmets with great features go for higher prices. However, you can compare the prices of same models in different shops and settle for the cheapest. But if you see a cheaper helmet that has a DOT sticker and fits you well, go for it without hesitating.